AE-MICRO-01
Fanless micro node
Dark gray aluminum enclosure with vertical heat-sink fins on the side. The rear face shows two stacked RJ45 jacks, one USB-C port, one HDMI port, and a round DC barrel jack. No chassis fan is in the photograph.
Field height catalog · MICRO / 1U / 2U
Edge compute that stays next to the data
AuroraEdge Computing Inc supplies fanless micro nodes, 1U rack servers with a front LCD, and dual-fan 2U chassis for buyers who run camera, sensor, and inference jobs on the premises instead of sending every frame to a distant region. Business description was not supplied by the buyer brief; this catalog is the hardware program that ships from San Diego.
3Appliance families
LCDTemp, watts, or node ID
M.2NVMe on ribbed tray
2×Hot-swap PSU
Download JPG
01 — Node heights
Three appliances. Photographs name the metal.
Each card below is written from its still: a two-port HDMI micro box, a 1U bezel that prints 42.1°C and 285W, and a 2U mesh chassis with two fans. The hero pair is a separate studio set (four RJ45 on the small box, node-ID LCD on the 1U) so buyers can see both layouts.
AE-1U-24
1U LCD edge server
Black 1U with rail ears. Left to right on the bezel: a round power button, a USB-A port, a row of status lamps, a monochrome LCD showing 42.1°C and 285W, and two cages. Built for a 19-inch rail pair.
AE-2U-DF
Dual-fan 2U chassis
Short black 2U with a perforated metal face, two circular fans behind the mesh, and rack ears with mounting holes on both sides. Ordered as a ventilated chassis, not as a standalone GPU card.
LCD close-up
Bezel text: CPU temp and CPU power
The cropped LCD reads two lines: CPU TEMP 48 C and CPU PWR 62 W. A green lamp and a blue lamp sit in a vertical row to the right of the window. Vent slots frame both sides of the bezel. Use this face when a technician must confirm the node is alive without opening a browser.
- Line 1: CPU TEMP in degrees C
- Line 2: CPU PWR in watts
- Green and blue status lamps on the right strip
- Catalog 1U (AE-1U-24) also prints °C and W on the wide bezel LCD
02 — Rear plate, NVMe tray, optics
Ports you can count. One M.2 on a ribbed tray.
Rear plate
The photographed rear plate is a square black panel with four corner screws. It carries one IEC C14 inlet at the top, two cages stacked on the left, two RJ45 jacks in the center, and two USB-A ports with blue interiors on the right. Optics are a separate line; empty cages show the latch geometry.
- IEC C14 primary inlet
- 2× cages for SFP-style modules
- 2× RJ45 jacks
- 2× USB-A service ports
M.2 NVMe on ribbed tray
The opened bay shows a single M.2 module with a black label, gold edge connector, and one mounting screw, seated on a ribbed metal heatsink tray inside a black chassis. No second drive is in the cavity. Trade orders ship with the tray installed; quote 512 GB or 1 TB on the RFQ.
Order note. Specify AE-NVME-512 or AE-NVME-1T. Blank trays are not a catalog SKU.
SFP housings
Four metal SFP-style modules lie in a row on pale gray paper. Two additional modules are already seated in the rear cages of a black chassis. The 1U and rear-plate photographs show empty cages so buyers can see the opening; this still is the module line (AE-SFP-CU) when you want copper-face housings on the same PO.
Cages on AE-1U-24 ship empty unless AE-SFP-CU is listed on the RFQ.
03 — Power and carton
Dual PSU modules and a foam-cradled 1U
Fulfillment stills match what leaves the dock: two hot-swap supplies with IEC inlets and metal pull handles, and an open brown carton with gray foam holding a black 1U that already has silver rack ears.
AE-PSU-PAIR
Dual hot-swap PSU
Two rectangular PSU modules sit side by side in the chassis rear. Each module has an IEC C14 inlet, a silver bail handle, a small black latch, and a honeycomb vent below the inlet. Order the pair with AE-1U-24 or AE-2U-DF when the site cannot accept a single inlet.
- Two independent C14 inlets
- Metal handles for hot-swap pull
- Perforated vents on the modules and on the chassis flanks
AE-CARTON-1U
Foam cavity carton
An open kraft carton holds gray foam with a rectangular pocket. A black 1U chassis sits in that pocket, silver rack ears already on the sides, vent slots visible on the long face. Inner cartons ship unprinted; your outbound label is applied at dispatch.
The photograph includes the chassis in foam—not an empty cutout.
04 — Program sheet
SKU matrix for buyers
| SKU | What ships | Visible in the still | Notes |
|---|---|---|---|
| AE-MICRO-01 | Fanless micro node | Side fins, 2× RJ45, USB-C, HDMI, DC jack | 12 V brick quoted separately |
| AE-1U-24 | 1U LCD server | Power button, USB-A, lamps, 42.1°C / 285W LCD, two cages | MOQ 10 |
| AE-2U-DF | Dual-fan 2U chassis | Mesh face, two fans, rail ears | Ventilated chassis |
| AE-NVME-512 / 1T | M.2 on tray | One module on ribbed heatsink tray | Factory seated |
| AE-SFP-CU | SFP housings | Four on the bench, two in cages | Optional on 1U cages |
| AE-PSU-PAIR | Two hot-swap supplies | C14 inlets, silver handles | For 1U / 2U |
| AE-CARTON-1U | Foam carton | Brown box, gray foam, 1U with silver ears | Unprinted inner |
VAR / SI
Pair AE-MICRO-01 with AE-1U-24 for store networks that need a quiet closet box plus a rail-mount head with a readable LCD.
Plant OT
Park AE-1U-24 beside a cabinet; confirm 48 C / 62 W on the close-up LCD face before opening a ticket.
Clinic closet
Fanless MICRO for quiet rooms. Keep AE-2U-DF in a ventilated rack, not inside a closed cupboard.
Colo cage
1U or 2U with AE-PSU-PAIR on a single rail pair. Add AE-SFP-CU when the cages should leave San Diego occupied.
05 — Trade FAQ
Answers tied to the hardware
Does the 1U include optics?
No. The AE-1U-24 still shows empty cages. Order AE-SFP-CU if you want the metal housings photographed on the bench and in the rear cages.
Is AE-2U-DF a GPU card?
No. The still is a 2U mesh chassis with two fans and rail ears. It is not a dual-fan add-in card.
Why do two LCDs show different values?
The hero 1U prints Edge Node 01 and an IP. The catalog 1U prints 42.1°C and 285W. The close-up prints CPU TEMP 48 C and CPU PWR 62 W. Quote the SKU face you need on the RFQ.
What is in the carton photo?
A black 1U with silver ears seated in gray foam inside an open brown carton.
How many Ethernet jacks on MICRO?
AE-MICRO-01 shows two stacked RJ45 plus USB-C, HDMI, and DC. The hero compact box is a four-jack 12V unit shown only in that pair still.
Lead time?
MICRO and 1U lots: 18–28 days after PO. 2U chassis, NVMe capacity, and SFP housings follow the module queue on the quote.
06 — RFQ
Send a line-item list
Name SKUs from the matrix. Company coordinates stay in the footer only.
Typical pack: AE-1U-24 × 10, AE-PSU-PAIR × 10, AE-NVME-1T × 10, AE-2U-DF as needed.